Hayward · Pumps
Hayward MaxFlo parts
OEM part numbers for the Hayward Max-Flo pump series (SP2805X7, SP2807X10, SP2810X15, SP2815X20, SP2810X152), from Hayward's own parts list.
Upfront pricing · many common repairs and installations have a set price, given before any work starts
Choose a part from the list below to see its part number and details.
Parts list
No diagram for this model yet. Every part number below is checked against Hayward’s own documentation. Choose a part from the list to see its details.
Pick a part
Tap any number on the drawing to see its OEM part number, which models it fits and what commonly goes wrong with it.
Need this pump repaired or replaced?
Not sure what’s wrong? Start the Pool Problem Finder.
Parts list
| Ref. | Part | Part no. |
|---|---|---|
| 1 | SPX1600P | |
| 1a | SPX1600N | |
| 2 | SPX1250L | |
| 3 | SPX125T | |
| 4 | SPX2800M | |
| 5 | SPX1700FG | |
| 6 | SPX2800AA | |
| 7 | SPX1600R | |
| 8 | SPX2800B | |
| 9 | Varies by model | |
| 10 | SPX1600Z2 | |
| 11 | SPX1600T | |
| 12 | SPX2600E | |
| 13 | SPX1600F | |
| 14 | SPX1600Z4 | |
| 15 | SPX125Z4 | |
| 16 | SPX1600G | |
| 17 | SPX1600J | |
| 18 | SPX1600Z5 | |
| 19 | SPX0125F | |
| 20 | Varies by model |
About the Hayward MaxFlo
Hayward's Max-Flo owner's manual (IS2800X5 Rev. C) covers five model numbers with one parts list. Most parts are shared across all five; the impeller and the motor are where they differ, so match the model number on your pump's label before ordering anything.
SP2810X152 uses the same impeller as SP2810X15 but a different motor (SPX1610Z2M). The motor numbers listed are for 60-cycle single-phase motors.
Common problems and the parts involved
Pump won't prime
Hayward's first checks: the strainer housing is full of water, the cover o-ring is clean, seated and lubricated, the cover is locked, and the baskets are clean. Suction-side air leaks show as bubbles at the return fittings.
Parts: Strainer cover, Strainer cover gasket, Basket. Troubleshoot this
Motor hums but doesn't start
Hayward names an impeller jammed with debris, and says to have a qualified repair professional open the pump.
Parts: Impeller, Motor, 60 cycle single phase. Troubleshoot this
Low flow
Hayward lists a clogged strainer or suction line, undersized piping, a dirty filter or partly closed valve, a suction air leak, and a plugged or damaged impeller, which is replaced together with a new seal assembly.
Parts: Basket, Impeller, Seal assembly. Troubleshoot this
Noisy pump
Hayward lists suction air leaks and cavitation, vibration from poor mounting, debris in the housing, and worn motor bearings, often after a seal leak lets water reach them.
Parts: Pump/strainer housing, Impeller, Seal assembly, Motor, 60 cycle single phase. Troubleshoot this
Motor shuts off
Hayward points to low voltage at the motor, often from undersized wiring; the motor's thermal overload protector shuts it off and restarts it once cooled until the cause is corrected.
Parts: Motor, 60 cycle single phase. Troubleshoot this
Repair or replace?
Most of these parts are replaceable on their own, which is why it matters which one has actually failed before anything is ordered. Whether a repair or a new pump makes more sense depends on what failed and the condition of the rest of the pump. Pool Pump Repair & Installation · Pool Equipment Replacement & Upgrades
Already know which part you need? Many common repairs and installations have a set price, given before any work starts. Not sure what’s wrong? The Pool Problem Finder starts from what your equipment is doing.
Set prices for common jobs
- Pump installation$225 labor
- Blowing out clogged lines$180
Labor prices don’t include the pump, filter or parts, which are quoted with the job. You hear the full price before any work starts.
Source
Part numbers and reference numbers: Hayward Industries, MaxFlo Owner's Manual (IS2800X5 Rev. C), accessed 2026-10-22. Hayward and MaxFlo are trademarks of their owner and are used here only to identify the equipment. Mobile Pool Repair is not affiliated with or endorsed by Hayward.
Hayward MaxFlo trouble?
Pool Pump Repair & Installation at your equipment pad in Queen Creek, Gilbert and Chandler and across the East Valley. Call, or text a photo of the label and the pad.