Hayward · Pumps
Hayward Super Pump parts
OEM part numbers for the Hayward Super Pump, from Hayward's own parts list, on a diagram you can tap.
Upfront pricing · many common repairs and installations have a set price, given before any work starts
Tap a number on the drawing, or a part in the list. Pinch or use + and − to zoom.
Original illustration by Mobile Pool Repair for identification only. Not to scale and not a Hayward drawing. Reference numbers and part numbers follow Hayward's parts list (1017836 Rev A, p. 9).
Pick a part
Tap any number on the drawing to see its OEM part number, which models it fits and what commonly goes wrong with it.
Need this pump repaired or replaced?
Not sure what’s wrong? Start the Pool Problem Finder.
Parts list
| Ref. | Part | Part no. |
|---|---|---|
| 1 | SPX1600P | |
| 2 | SPX1600N | |
| 3 | SPX1600D | |
| 4 | SPX1600S | |
| 5 | SPX1600M | |
| 6 | SPX4000FG | |
| 7 | SPX1620AA | |
| 8 | SPX1600R | |
| 9 | SPX2600B | |
| 10 | Varies by model | |
| 11 | Varies by model | |
| 12 | SPX1600T | |
| 13 | SPX2600E5 | |
| 14 | SPX1600F5 | |
| 15 | SPX1600Z4 | |
| 16 | SPX0125Z4 | |
| 17 | Varies by model | |
| 18 | SPX1600J | |
| 19 | SPX0125F | |
| 20 | Varies by model | |
| 21a | SPX2600CAP1 | |
| 21b | SPX2600CAP3 |
About the Hayward Super Pump
Hayward's Super Pump owner's manual (IS26001 Rev-B) covers five model numbers with one parts list. Most parts are shared across all five; the impeller, the motor and the seal assembly are where they differ, so match the model number on your pump's label before ordering anything.
For the SP2670007X10, the capacitor set depends on which motor the pump was built with: Hayward's 2024 manual lists SPX2600CAP1 for units with the SP2607Z1MTG motor and SPX2600CAP3 for units with the SP26110Z1MTG motor.
Part numbers identify a part. They don't tell you whether that part is the one that failed, which is the question a diagnosis answers.
Common problems and the parts involved
Pump won't prime
Hayward's first checks: the strainer housing is full of water, the cover o-ring is clean, seated and lubricated, the cover is locked, and the baskets are clean. Suction-side air leaks show as bubbles at the return fittings.
Parts: Strainer cover, Strainer cover gasket, Basket. Troubleshoot this
Motor hums but doesn't start
Hayward names an impeller jammed with debris, and says to have a qualified repair professional open the pump. Switch the pump off at the breaker rather than letting it hum.
Parts: Impeller, Motor. Troubleshoot this
Low flow
Hayward lists a clogged strainer or suction line, a dirty filter or partly closed valve, a suction air leak, and a plugged or damaged impeller, which is replaced together with a new seal assembly.
Parts: Basket, Impeller, Seal assembly. Troubleshoot this
Noisy pump
Hayward lists suction air leaks and cavitation, vibration from poor mounting, debris in the housing, and worn motor bearings, often from a seal leak.
Parts: Pump/strainer housing, Seal assembly, Mounting foot, Motor. Troubleshoot this
Motor shuts off and restarts
The motor's thermal overload protector is doing its job. Hayward points first at low voltage, often from undersized wiring, which a qualified professional should check.
Parts: Motor. Troubleshoot this
Motor won't start
Hayward's checks are wiring connections, switches and relays, tripped breakers or GFCIs, blown fuses, and the timer.
Parts: Motor, Capacitor set (units built with the SP2607Z1MTG motor), Capacitor set (units built with the SP26110Z1MTG motor). Troubleshoot this
Repair or replace?
Most of these parts are replaceable on their own, which is why it matters which one has actually failed before anything is ordered. Whether a repair or a new pump makes more sense depends on what failed and the condition of the rest of the pump. Pool Pump Repair & Installation · Pool Equipment Replacement & Upgrades
Already know which part you need? Many common repairs and installations have a set price, given before any work starts. Not sure what’s wrong? The Pool Problem Finder starts from what your equipment is doing.
Set prices for common jobs
- Pump installation$225 labor
- Blowing out clogged lines$180
Labor prices don’t include the pump, filter or parts, which are quoted with the job. You hear the full price before any work starts.
Source
Part numbers and reference numbers: Hayward Industries, Super Pump Series Owner's Manual (1017836 Rev A), accessed 2026-10-22. Hayward and Super Pump are trademarks of their owner and are used here only to identify the equipment. Mobile Pool Repair is not affiliated with or endorsed by Hayward.
Hayward Super Pump trouble?
Pool Pump Repair & Installation at your equipment pad in Queen Creek, Gilbert and Chandler and across the East Valley. Call, or text a photo of the label and the pad.